Ensure that the edge connector is correctly seated in the slot. You can install a 5. The clock speed and system bus are determined by the kind of processor you have installed in your system. Refer to the following: There are four options: Checking Jumper Settings Do not over-tighten the screws as this can stress the motherboard. These connectors are well designed and will only fit in one orientation.

Uploader: Tojataur
Date Added: 13 November 2010
File Size: 56.39 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 81331
Price: Free* [*Free Regsitration Required]

Front Panel Audio header This header allows the user to install auxiliary front-oriented microphone and line-out ports for easier access.

ECS KM400-M2 – 3.0 – motherboard – micro ATX – Socket A – KM400

Setting Jumpers Use the motherboard jumpers to set system configuration options. Page 65 The main interface is divided into two windows and the toolbar above contain the main functions. Typematic Rate Setting Disabled If this item is enabled, you can use the following two items to set the typematic rate and the typematic delay settings for your keyboard.

Don’t show me this message again.

KMM2 V ECS ELITEGROUP Motherboard Mainboard Drivers Manuals BIOS

Page 12 Memo Introducing the Motherboard Drivers and software are automatically installed in sequence. If you are setting up a new hard disk drive that supports LBA mode, more than one line will appear in the parameter eata.

  GATEWAY MX6430 MODEM DRIVER

Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author.

The main interface is divided into two windows and the toolbar above contain the main functions. Page 6 Integrated Peripherals If the item is set to User Define, you can insert your own timeouts for the power-saving modes. Load Fail-Safe Defaults Option This option opens a dialog box that lets you install fail-safe defaults for all appropriate items in the Setup Utility: Using Via Raid Km400-m Put a staa mark in the check box to install the feature you want.

The left windowpane displays the controller om400-m2 disk drives and the right windowpane displays the details of the controller or disk drives. Installing Add-on Cards Installing Add-on Cards The slots on this motherboard are designed to hold expansion cards and connect them to the system bus.

The total memory capacity is 2GB. Remove a blanking plate from the system case corresponding to the slot you are going to use. Page of 67 Go.

Under this setting, the system dynamically allocates resources to Plug and Play devices as they are required. MC97 Modem Auto Enables and disables the onboard modem.

Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. The default options are recommended.

  HP DESKJET 8345 DRIVER

The following screen appears: Follow the instructions on the screen to install the items. Disable this item if you are going to install an external modem.

EliteGroup KMM2 V (KMM) Motherboard Boot drives – Questions (with Pictures) – Fixya

Installing a Floppy Diskette Drive The motherboard has a floppy diskette drive FDD1 interface and ships with a diskette drive ribbon cable that supports one or two floppy diskette drives. Redundant Array of Independent Disk Drives use jointly several hard drives to increase data transfer rates and km4000-m2 security. DOC file in the root directory. The same confirmation message appears when the Auto Setup for Performance option is selected.

There are four options: Enter text from picture: Checking Jumper Settings Checking Jumper Settings The following illustration shows the location of the motherboard jumpers.

Install the edge connector of the add-on card into the expansion slot. By pressing ‘print’ button you will print only current page.

Operation is subject to the following conditions: TXT or something similar.